Audiocenter introduces K-LA212 DSP Active dual 12” line array
.jpg)
Audiocenter has launched the K-LA212 DSP Active dual 12” line array with dual 3” HF compression
driver. The Line Array System is specifically designed for mid to mid-high market but can be
used in any form of installs.
The system includes a powerful D Class Amplifier and highlights an enormous 1600W RMS!
K-LA-DSP can be used in applications such as live sound for rental application for small and
mid-size venues, permanent installations in theatres, houses of worship, convention centres,
Portable PA, clubs, ballrooms, live theatres and almost anywhere where people gather to enjoy
music or hear the word spoken, are within the scope of the K-LA-DSP series.
K-LA-DSP system is combined in modularization, which is suitable for any performance venues.
The K-LA212-DSP90/ K-LA212-DSP60 incorporate a novel phase corrector, which shifts the center of
the speakers closer to the center of the box. This same corrector optimizes the working frequency
of the speaker and the wave guides system of the horn, getting a sum of+6 dB on the entire response
band of the subwoofer. Create a two way coaxial system capable of achieving a consistent response
across the horizontal plane coverage. It is with high-performance, small size and lightweight, which
is suitable for both touring performance as well as fixed installations.
The HF drivers are two customized BEYMA drivers with composite membrane (2.B4” voicecoil), and the LF
drivers are two customized BEYMA12” drivers (3”voicecoil).
K-LA212-DSP90/K-LA212-DSP60 system can be used as main PA sound reinforcement with 3 cabinets atleast
and 16 cabinets maximum per array.
K—LA212—DSP90/K—LA212 DSP60 can be suspended vertically. The integrated hardware built- into the cabinet
with 12.0mm high intensity pins make installation easy and convenient. The system can be combined in
modularization according to the coverage angle of place, which can meet the requirements of different
applications. The installation of the system is very flexible and convenient. The engineer can setup
the single line array system on his own. For those places where the system cannot be flown, there are
customized frames suitable for both flying and ground stacking (maximum 4 cabinets).